Zhi lou board · Steel structure light roofing floor panel
Features：
The Zhi lou board system consists of Aifuxi board. keel structure and related connecting parts and accessori. It has the characteristics of light weight, high strength, firm structure, stable performance, high flatness, non-combustible fireproof, waterproof and moisture-proof, non-radioactive and casy to install. Inorganic sheet. Achieve personalized space utilization needs while increasing the use of building space
The Zhi lou system can use the steel keel as the main load-bearing structure. The Aifuxi board is fixed on the load-bearing steel keel as an important liner. The 40x40x3mm steel mesh is laid on the Aifuxi board, and the steel wire is poured 30-60mm thick. Cement mortar, and finally, make suitable decorative surface materials.
Its structural system has been tested and proven to be safe, stable, durable, easy to install, and has a short construction period. It can easily separate the ultra-high and large space into the pattern you need. It can also be used in steel structures, integrated houses, container house base floors,stair panels and roofing decks.
Construction method
According to the different spans of the building, the calculation of static load and dynamic load, select the reasonable profile and design the spacing of the main and auxiliary beams to better and rationally choose Aifuxi zhilou.
The arrangement of profiles during the construction of Zhi floor is required to meet the design requirement of the drawings. The weld strength and welding quality must meet the requirements of GB/T5185-1985. The welded joints with the fiber cement board should be ground before the decking.
According to the different spans of the building, the size of the load, the spacing of the supporting beams, ctc. the thickness of the fiber cement board is also different. However, according to the specifications of the national building materials, the fiber cement board selected must be a high-density fiber cement board with a density greater than 1.8g/cm8..the flexural strength(air dry state) should be greater than28mpa.
The longitudinal direction of the slab should be placed parallel to the main beam. The edge of the joint between the slab and the slab should fall on the same main beam. The slab joint should be filled with silicone rubber seal.
No edge of the floor may not be suspended
The length of the self-tapping- serews for fixing is0--3.5mm, the nail pitch is between 300-600mm, and the edge of the nail hole around the board should be about 20mm.
Aifuxi® Zhi floor board is commonly used for thickness and steel structure spacing：
1、15mm Zhi lou board：Steel beam spacing 400*400mm
2、18mm Zhi lou board：Steel beam spacing 400*400mm
3、20mm Zhi lou board：Steel beam spacing 600*600mm
4、24mm Zhi lou board：Steel beam spacing 1200*600mm
5、30mm Zhi lou board：Steel beam spacing1200*600mm
